P0300 Peugeot Random Cylinder Misfire Condition

P0300 Peugeot Random Cylinder Misfire Condition

Possible causes
– Faulty spark plug (s)
– Faulty ignition coil (s)
– Clogged or faulty fuel injector (s)
– Intake air leak
– Fuel injectors harness is open or shorted
– Fuel Injectors circuit poor electrical connection
– Ignition coils harness is open or shorted
– Ignition coils circuit poor electrical connection
– Insufficient cylinders compression
– Incorrect fuel pressure
Tech description
The P0300 Peugeot code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are common caused of multi-cylinder misfiring. If no leak are found the next step is to replace the spark plugs. If the problem persist more tests needs to be done to diagnose problem, see “Possible Causes”
What about the obd code?
The control module monitors the crankshaft speed and has detected a misfire condition
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Lack/loss of power
– Hard start
– Engine hesitation
P0300 Peugeot Description

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.

Peugeot Vehicle:Peugeot 107,Peugeot 208,Peugeot 408,Peugeot 508,Peugeot RCZ,Peugeot 4007,Peugeot Expert Tepee
CategoriesUncategorized