P1490 Iveco Vacuum Cut Valve Bypass Valve

P1490 Iveco Vacuum Cut Valve Bypass Valve

Possible causes
– Faulty Vacuum Cut Valve Bypass Valve
– Clogged vacuum hoses to the Vacuum Cut Valve Bypass Valve
– Vacuum cut valve bypass valve harness is open or shorted
– Vacuum cut valve bypass valve electrical circuit poor connection
What about the obd code?
– An improper voltage signal is sent to ECM through vacuum cut valve bypass valve.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1490 Iveco Description

The vacuum cut valve and vacuum cut valve bypass valve are installed in parallel on the EVAP purge line between the fuel tank and the EVAP canister.

The vacuum cut valve prevents the intake manifold vacuum from being applied to the fuel tank. The vacuum cut valve bypass valve is a solenoid type valve and generally remains closed. It opens only for on board diagnosis.

The vacuum cut valve bypass valve responds to signals from the ECM. When the ECM sends an ON (ground) signal, the valve is opened. The vacuum cut valve is then bypassed to apply intake manifold vacuum to the fuel tank.

CategoriesUncategorized