P2101 Infiniti Throttle Actuator Position Performance
Possible causes
– Faulty Throttle Actuator Control (TAC) module
– Throttle Actuator Control (TAC) module harness is open or shorted
– Throttle Actuator Control (TAC) module circuit poor electrical connection
– Throttle Actuator Control (TAC) module harness is open or shorted
– Throttle Actuator Control (TAC) module circuit poor electrical connection
What about the obd code?
The Engine Control Module (ECM) has detected an out of range condition between the predicted and actual throttle position.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– No throttle response
– No throttle response
P2101 Infiniti Description
The Engine Control Module (ECM) is the control center for the Throttle Actuator Control (TAC) system. The ECM determines the drivers intent and then calculates the appropriate throttle response. The ECM achieves throttle positioning by providing a pulse width modulated voltage to the TAC motor. The TAC system uses the following circuits for Motor control 1 and Motor control 2.
Two processors are also used to monitor the TAC system data. Both processors are located within the ECM. Both processors monitor each other’s data to verify that the indicated throttle position is correct.
Infiniti Vehicle:Infiniti EX35,Infiniti FX35,Infiniti FX50,Infiniti G25,Infiniti G37,Infiniti M35,Infiniti M37,Infiniti M56,Infiniti QX562013 Infiniti,2012 Infiniti,2011 Infiniti,2010 Infiniti,2009 Infiniti,2008 Infiniti,2007 Infiniti,2006 Infiniti,2005 Infiniti,2004 Infiniti,2003 Infiniti,2002 Infiniti,2001 Infiniti,2000 Infiniti,1999 Infiniti,1998 Infiniti,1997 Infiniti,1996 Infiniti,