P2459 Isuzu Diesel Particulate Filter Regeneration Frequency
Possible causes
– Exhaust leak
– Improperly installed or loose Exhaust Gas Temperature (EGT)
– Low engine compression
– Corroed fuel injector
– Water in the fuel system
– Improperly installed or loose Exhaust Gas Temperature (EGT)
– Low engine compression
– Corroed fuel injector
– Water in the fuel system
What about the obd code?
The P2459 Isuzu will set if the Engine Control Module (ECM) detects that the average time between completed regenerations is less than a calibrated threshold.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P2459 Isuzu Description
The particulates in the exhaust gases are collected by the Diesel Particulate Filter (DPF). When the filter becomes saturated with particulates, they are incinerated by a regeneration process. The regeneration process increases the exhaust gas temperature, warning the Diesel Oxidation Catalyst (DOC) first, the warning the DPF. The Engine Control Module (ECM) monitors the system with inputs from two Exhaust Gas Temperature (EGT) sensors 1 and 2 and the exhaust differential pressure sensor.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender