P0449 Toyota EVAP System Vent Valve/Solenoid Circuit

P0449 Toyota EVAP System Vent Valve/Solenoid Circuit

Possible causes
– Purge Control Valve harness is open or shorted
– Purge Control Valve electrical circuit poor connection
– Faulty canister vent control valve
What about the obd code?
The Engine Control Module (ECM) has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P0449 Toyota Description

The Evaporative Emission System (EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid (the EVAP canister vent control valve) responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized.

A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.

This solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.

Toyota Vehicle:Toyota Prius,Toyota Celica,Toyota Supra,Toyota Carina,Toyota Camry,Toyota MR2,Toyota Aygo,Toyota 4Runner,Toyota Avalon,Toyota Camry,Toyota Corolla,Toyota FJ Cruiser,Toyota Highlander,Toyota Land Cruiser,Toyota Matrix,Toyota Prius,Toyota RAV4,Toyota Sequoia,Toyota Sienna,Toyota Solara,Toyota Tacoma,Toyota Tundra,Toyota Yaris,
CategoriesUncategorized