C1261 Citroen Steering Angle Sensor Not Calibrated
Possible causes
– Steering Angle Sensor(SAS) not calibrated
– Faulty Steering Angle Sensor(SAS)
– Steering Angle Sensor(SAS) harness is open or shorted
– Steering Angle Sensor(SAS) circuit poor electrical connection
– Faulty Steering Angle Sensor(SAS)
– Steering Angle Sensor(SAS) harness is open or shorted
– Steering Angle Sensor(SAS) circuit poor electrical connection
What about the obd code?
The SAS used for ESC control needs 0 set because the SAS measures an absolute angle. 0 set is done by using the scantool device. If abnormal 0 set is detected or no information in SAS is detected, a failure is recognized.
C1261 Citroen OBD Code Description
The Steering Angle Sensor(SAS) is installed below the clock spring and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses the signals from the SAS when performing ESC-related calculations.
Citroen Vehicle:2013 Citroen,2012 Citroen,2011 Citroen,2010 Citroen,2009 Citroen,2008 Citroen,2007 Citroen,2006 Citroen,2005 Citroen,2004 Citroen,2003 Citroen,2002 Citroen,2001 Citroen,2000 Citroen,1999 Citroen,1998 Citroen,1997 Citroen,1996 Citroen,