C1261 Infiniti Steering Angle Sensor Not Calibrated
Possible causes
– Steering Angle Sensor(SAS) not calibrated
– Faulty Steering Angle Sensor(SAS)
– Steering Angle Sensor(SAS) harness is open or shorted
– Steering Angle Sensor(SAS) circuit poor electrical connection
– Faulty Steering Angle Sensor(SAS)
– Steering Angle Sensor(SAS) harness is open or shorted
– Steering Angle Sensor(SAS) circuit poor electrical connection
What about the obd code?
The SAS used for ESC control needs 0 set because the SAS measures an absolute angle. 0 set is done by using the scantool device. If abnormal 0 set is detected or no information in SAS is detected, a failure is recognized.
C1261 Infiniti OBD Code Description
The Steering Angle Sensor(SAS) is installed below the clock spring and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses the signals from the SAS when performing ESC-related calculations.
Infiniti Vehicle:Infiniti EX35,Infiniti FX35,Infiniti FX50,Infiniti G25,Infiniti G37,Infiniti M35,Infiniti M37,Infiniti M56,Infiniti QX562013 Infiniti,2012 Infiniti,2011 Infiniti,2010 Infiniti,2009 Infiniti,2008 Infiniti,2007 Infiniti,2006 Infiniti,2005 Infiniti,2004 Infiniti,2003 Infiniti,2002 Infiniti,2001 Infiniti,2000 Infiniti,1999 Infiniti,1998 Infiniti,1997 Infiniti,1996 Infiniti,