Dodge P0206

P0206 Dodge INJECTOR #6 CONTROL CIRCUIT NOTE: All symptoms listed above are diagnosed using the same tests. The title for the tests will be P0206-INJECTOR #6 CONTROL CIRCUIT. When Monitored and Set Condition: When Monitored: While the engine is running. Set Condition: When the injector current falls below a calibrated threshold. POSSIBLE CAUSES PASS TROUGH…

Dodge P0217

P0217 Dodge DECREASED ENGINE PERFORMANCE DUE TO ENGINE OVERHEAT CONDITION POSSIBLE CAUSES ECT SENSOR OTHER DTC’S MECHANICAL FAILURE DIAGNOSTIC PROCEDURE NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures. With the DRBIII®, read DTCs. Are other Cooling system DTCs present? Yes –> Trouble shoot the other DTCs first No –> Go To 2 Allow…

Dodge P0218

P0218 Dodge HIGH TEMPERATURE OPERATION ACTIVATED When Monitored and Set Condition: When Monitored: Whenever the engine is running. Set Condition: This DTC is an informational code and does not necessarily indicate that a failure exists. It merely flags the fact that trans sump oil temperature reached 116°C or 240F. This temperature level can be reached…

Dodge P0219

P0219 Dodge CRANKSHAFT POSITION SENSOR OVER SPEED SIGNAL When Monitored and Set Condition: When Monitored: While the engine is running. Set Condition: The ECM detects engine speed is above a calibrated threshold. POSSIBLE CAUSES OTHER DTC’S MECHANICAL OVERSPEED OF ENGINE INTERMITTENT CONDITION DIAGNOSTIC PROCEDURE NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures. Turn…

Dodge P0234

P0234 Dodge TURBO BOOST LIMIT EXCEEDED When Monitored and Set Condition: When Monitored: While running. Set Condition: The intake air pressure is above a calibrated value for a calibrated amount of time. POSSIBLE CAUSES OTHER DTC’S WASTEGATE STUCK DIAGNOSTIC PROCEDURE NOTE: Refer to VERIFICATION TESTS for appropriate verification test procedures. Turn the ignition on. With…