P0377 Isuzu Timing Reference High Resolution Signal B Too Few Pulses
Possible causes
– Timing Reference Optical Sensor harness is open or shorted
– Timing Reference Optical Sensor circuit poor electrical connection
– Faulty Timing Reference Optical Sensor
– Damaged Powertrain Control Module (PCM)
– Timing Reference Optical Sensor circuit poor electrical connection
– Faulty Timing Reference Optical Sensor
– Damaged Powertrain Control Module (PCM)
What about the obd code?
Some high resolution pulses are missing from the optical sensor to the PCM
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P0377 Isuzu Description
The optical sensor provides a high resolution signal to the Powertrain Control Module (PCM) by counting pulses on the sensor disk located in the injection pump. The high resolution is one of the most important inputs by the PCM for fuel control and timing. This test monitors the number of high resolution pulses which have been missed (not detected). It’s based on a comparison between the number of pulses that were detected since the last pump cam pulse and the number of the pulses that should have occurred. There are approximately 64 high resolution pulses for every cam pulse.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender