P1238 BMW Turbocharger Control valve

P1238 BMW Turbocharger Control valve

Possible causes
– Air leakage after turbocharger
– Hoses between turbocharger and turbocharger control valve are loose, blocked or damage
– Hoses between turbocharger control valve and pressure servo are loose, blocked or damage
– Faulty turbocharger control valve
– Faulty boos pressure control valve pressure servo
– Sticking boost pressure control valve
Tech description
First step is checking for air leak after turbocharger.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1238 BMW Description

The code O1238 will set if RPM is above 3500 and engine is operating at a high load, control signal to turbocharger control valve is at maximum and boos pressure from boos pressure sensor is lower than approximately 2.9 psi under normal boost pressure (signal too low. If mass from mass air flow sensor is high than desired value (signal too high) it is interpreted as a fault by the Engine Control Module (ECM). When the code is set, a reduce boos pressure is used as a substitute value.

BMW Vehicle:BMW F650GS,BMW F800S,BMW F800ST,BMW G450X,BMW G650 Xmoto,BMW R1200GS,BMW R1200R,BMW R1200RT,BMW R1200S,BMW K1200LT,BMW K1300GT,BMW K1300R,BMW K1300S,BMW K1600GT and K1600GTL,BMW S1000RR,BMW E36/5,BMW E36/7,BMW E36/8,BMW E38,BMW E38/2,BMW E38/3,BMW E39,BMW E46/5,BMW E46/4,BMW E46/3,BMW E46/2,BMW E46/C,BMW E52,BMW E53,BMW E60,BMW E61,BMW E62,BMW E63,BMW E64,BMW E65,BMW E66,BMW E67,BMW E68,BMW E70,BMW E71,BMW E72,BMW E81,BMW E82,BMW E83,BMW E84,BMW E85,BMW E86,BMW E87,BMW E88,BMW E89,BMW E90,BMW E91,BMW E92,BMW E93,BMW F01,BMW F02,BMW F03,BMW F04,BMW F06,BMW F07,BMW F10,BMW F11,BMW F12,BMW F13,BMW F15,BMW F18,BMW F20,BMW F21,BMW F22,BMW F25,BMW F26,BMW F30,BMW F31,BMW F32,BMW F33,BMW F34,BMW F35,BMW F36,BMW F80,BMW F82