P1310 Cadillac Igniter Circuit Malfunction No. 3

P1310 Cadillac Igniter Circuit Malfunction No. 3

Possible causes
– Ignition Coil No. 3 harness is open or shorted
– Ignition Coil No. 3 circuit poor electrical connection
– Faulty Ignition Coil No. 3
– Faulty Engine Control Module (ECM)
What about the obd code?
The P1310 Cadillac code is for the ignition coil No.3 and is set when there is no IGF signal to the ECM during engine operation.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P1310 Cadillac Description

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Ignitor is integral to ignition coil. The Engine Control Module (ECM) determines ignition timing and outputs a ignition signal (IGT) for each cylinder. Based on the IGT signals, power transistors in the ignitor cut of current to primary coil in ignition coil, causing ignition coil to fire spark plug. After delivering a command to turn off primary circuit on the IGT wire, ECM monitors IGF circuit to ensure primary switching occurred.

Cadillac Vehicle:Cadillac CTS Coupe, Cadillac CTS-V Coupe , Cadillac Eldorado , Cadillac Escalade EXT , Cadillac ATS , Cadillac CTS , Cadillac CTS Sedan , Cadillac CTS Sport Sedan , Cadillac CTS-V , Cadillac CTS-V Sedan , Cadillac Catera , Cadillac DTS , Cadillac DeVille , Cadillac STS-V , Cadillac STS , Cadillac Seville , Cadillac XTS , Cadillac XLR , Cadillac XLR Platinum , Cadillac Escalade , Cadillac SRX