P1486 BMW EVAP System Pinched Hose Found

P1486 BMW EVAP System Pinched Hose Found

Possible causes
– Leak Detection Pump (LDP) pressure hose obstructed
– Faulty Leak Detection Pump (LDP)
– Obstructed hose
– EVAP canister obstructed
What about the obd code?
Malfunction is detected when during system monitor test the Powertrain Control Module (PCM) detected a pinched EVAP hose
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Possible a noticeable fuel odor caused by the release of fuel vapors
P1486 BMW Description

The Evaporative emissions system is design to prevent the escape of fuel vapors from the fuel system. Leaks in the system, ca allow vapors to escape into the atmosphere. The leak detection system tests for EVAP system leaks and blockage.

During the self-diagnostics, the Powertrain Control Module (PCM) first checks the Leak Detection Pump (LDP) for electrical and mechanical faults. If the first checks pass, the PCM then uses the LDP to seal the vent valve and pump air into the system to pressurize it. If a leak is present, the PCM will continue pumping the LDP to replace the air that leaks out. The PCM determines the size of the leak based on how fast/long it must pump the LDP as it tries to maintain pressure in the system.

BMW Vehicle:BMW F650GS,BMW F800S,BMW F800ST,BMW G450X,BMW G650 Xmoto,BMW R1200GS,BMW R1200R,BMW R1200RT,BMW R1200S,BMW K1200LT,BMW K1300GT,BMW K1300R,BMW K1300S,BMW K1600GT and K1600GTL,BMW S1000RR,BMW E36/5,BMW E36/7,BMW E36/8,BMW E38,BMW E38/2,BMW E38/3,BMW E39,BMW E46/5,BMW E46/4,BMW E46/3,BMW E46/2,BMW E46/C,BMW E52,BMW E53,BMW E60,BMW E61,BMW E62,BMW E63,BMW E64,BMW E65,BMW E66,BMW E67,BMW E68,BMW E70,BMW E71,BMW E72,BMW E81,BMW E82,BMW E83,BMW E84,BMW E85,BMW E86,BMW E87,BMW E88,BMW E89,BMW E90,BMW E91,BMW E92,BMW E93,BMW F01,BMW F02,BMW F03,BMW F04,BMW F06,BMW F07,BMW F10,BMW F11,BMW F12,BMW F13,BMW F15,BMW F18,BMW F20,BMW F21,BMW F22,BMW F25,BMW F26,BMW F30,BMW F31,BMW F32,BMW F33,BMW F34,BMW F35,BMW F36,BMW F80,BMW F82