P2101 Citroen Throttle Actuator Position Performance
Possible causes
– Faulty Throttle Actuator Control (TAC) module
– Throttle Actuator Control (TAC) module harness is open or shorted
– Throttle Actuator Control (TAC) module circuit poor electrical connection
– Throttle Actuator Control (TAC) module harness is open or shorted
– Throttle Actuator Control (TAC) module circuit poor electrical connection
What about the obd code?
The Engine Control Module (ECM) has detected an out of range condition between the predicted and actual throttle position.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– No throttle response
– No throttle response
P2101 Citroen Description
The Engine Control Module (ECM) is the control center for the Throttle Actuator Control (TAC) system. The ECM determines the drivers intent and then calculates the appropriate throttle response. The ECM achieves throttle positioning by providing a pulse width modulated voltage to the TAC motor. The TAC system uses the following circuits for Motor control 1 and Motor control 2.
Two processors are also used to monitor the TAC system data. Both processors are located within the ECM. Both processors monitor each other’s data to verify that the indicated throttle position is correct.
Citroen Vehicle:2013 Citroen,2012 Citroen,2011 Citroen,2010 Citroen,2009 Citroen,2008 Citroen,2007 Citroen,2006 Citroen,2005 Citroen,2004 Citroen,2003 Citroen,2002 Citroen,2001 Citroen,2000 Citroen,1999 Citroen,1998 Citroen,1997 Citroen,1996 Citroen,