P0603 Isuzu ECM Power Supply Circuit
Possible causes
– Loose or poor battery terminal connection
– Low battery charge
– ECM power supply circuit is open or shorted
– ECM Programing
– Faulty ECM
– Low battery charge
– ECM power supply circuit is open or shorted
– ECM Programing
– Faulty ECM
Tech description
Start by charging the vehicles battery and clean terminal, once the battery is charged and the terminals are clean and secure, erase code. If the code comes back ON you may have to reprogram or replaced ECM
What about the obd code?
Indicates the ECM has experienced an internal memory fault.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Engine may not start
– Engine may not start
P0603 Isuzu Description
Battery voltage is supplied to the ECM even when the ignition switch is turned OFF for the ECM memory function of the DTC memory, the air-fuel ratio feedback compensation value memory, the idle air volume learning value memory, etc.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender