P0604 Isuzu ECM Self Check Fault
Possible causes
– Loose or poor battery terminal connection
– Low battery charge
– ECM power supply circuit is open or shorted
– ECM Programing
– Faulty ECM
– Low battery charge
– ECM power supply circuit is open or shorted
– ECM Programing
– Faulty ECM
Tech description
Check the ECM/PCM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.
What about the obd code?
Indicates the ECM has experienced an internal memory fault.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Engine may not start
– Engine may not start
P0604 Isuzu Description
The ECM continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.
Isuzu Vehicle:2013 Isuzu,2012 Isuzu,2011 Isuzu,2010 Isuzu,2009 Isuzu,2008 Isuzu,2007 Isuzu,2006 Isuzu,2005 Isuzu,2004 Isuzu,2003 Isuzu,2002 Isuzu,2001 Isuzu,2000 Isuzu,1999 Isuzu,1998 Isuzu,1997 Isuzu,1996 Isuzu,Isuzu Rodeo,Isuzu Trooper,Isuzu Ascender